Although centrifuges have been used more and more frequently in recent years, many people are still confused by this, so Huada will summarize the following points for you, hoping to help you use centrifugal machines in a safer and more standardized way.
Huada LGZ Vertical Bottom Discharge Scraper Centrifuges
1. All kinds of liquids or other debris are strictly prohibited to enter the centrifugal chamber. Otherwise back to damage the host.
2. The centrifuge shell should be properly grounded, so as to avoid accidents caused by the influence of moisture on the whole machine.
3. Please do not open the top cover when the centrifuge is running at high speed.
4. When the setting error will automatically alarm to remind you to reset.
Huada GKF Pharma Peeler Centrifuges
1. Do not use in humid, high temperature, dusty places.
2. To ensure safety and centrifugal effect, the instrument must be placed on a sturdy, shockproof, horizontal table, and ensure that the four feet are balanced force.
3. Centrifugal tubes with liquid as even as possible visually, if the liquid difference is too large operation will produce a large vibration, this should be stopped to check, so that the liquid added to meet the requirements, centrifugal test tubes must be an even number of symmetrical into. The nut connecting the rotor and motor shaft must be tightened.
4. Do not move the centrifuge during operation, it is strictly prohibited to open the door cover.
5. Do not open the door cover when the motor and rotor are not completely stopped.
6. The power supply has an independent ground line, and it is strictly forbidden to share the zero line with the ground line to prevent electric shock and injury.
7. After the separation is over, the centrifuge should be wiped clean in time, while closing the power switch and cut off the power.
8. Remove the rotor should be very careful, the correct method is to use non-metallic tools (such as the handle of a screwdriver) to reach the rotor below the rotor from more than gently upward knocking the rotor body, repeatedly until the connection between the rotor body and the motor shaft shaking loose. It is strictly forbidden to pull upward directly by hand after loosening the nut, so as not to damage the motor's flexible support.
9. should always check the rotor and centrifuge tube whether there are cracks, aging and other phenomena, such as the need for timely replacement.
Do you need a new centrifuge equipment, Huada offers many types of centrifuges, which can be used in different fields. Or do you want to know more about centrifuges? Stay tuned to Huada!
Previous: None
